Sony PDW-700 Operation Manual page 181

2) *: 0001 to 0099
3) The unit can handle files with user-defined names in
the "C*" and "E*"parts.
Notes
• For C*.MXF files, some data, such as file header
metadata, may be missing.
• Depending on the transfer destination directory and the
file type, transfer may not be possible.
• For C*.MXF files, the UMID of the copy source file is
not saved. However, it is saved if an immediately
preceding SITE UMMD extended command has been
issued.
For details, see "File operation restrictions" (page
170).
Syntax: STOR <SP> <path-name> <CRLF>
Input example: STOR Edit/E0001E01.SMI
RNFR
RNTO
Rename a file. Specify the file to be renamed with the
RNFR command, and specify the new name with the
RNTO command. (Always follow a RNFR command
with a RNTO command.)
Syntax: RNFR <SP> <path-name (before
change)> <CRLF>
RNTO <SP> <path-name (after change)>
<CRLF>
Input example: RNFR General/info.txt
RNTO General/clip_info.txt
DELE
Deletes the specified file on this unit.
Note
Depending on the directory and file type, deletion may
not be possible.
For details, see "File operation restrictions" (page
170).
Syntax: DELE <SP> <path-name> <CRLF>
Input example: DELE Clip/C0099.MXF
STAT
Sends information about properties of the specified file,
or about data transfer status, from this unit to the remote
computer.
The following property information is sent, depending
on the file type.
• MXF file
- File name
- File type
- CODEC type
- Frame rate
- Number of audio channels
- Duration
- UMID
• non-MXF file
- File name
Syntax: STAT <SP> <path-name> <CRLF>
The following data is transferred, depending on
whether a file is specified with <path-name>.
• File specified: The properties of the specified
file
• No specification: The size of the data transferred
thus far (unit: bytes)
Input example: STAT Clip/C0001.MXF
ABOR
Requests this unit to abort a file transfer currently in
progress.
Syntax: ABOR <CRLF>
SYST
Displays the system name of this unit.
Syntax: SYST <CRLF>
HELP
Displays a list of the commands supported by this unit,
or an explanation of the specified command.
Syntax: HELP <SP> <command-name> <CRLF>
The following data is transferred, depending on
whether a command name is specified with
<command-name>.
• Command name specified: Explanation of the
specified command.
• No specification: Command list
• Input example: HELP RETR
NOOP
Does nothing except return a response. (Used to check
whether this unit is running.)
Syntax: NOOP <CRLF>
PWD
Displays the current directory ("/" if the directory is the
root directory).
Syntax: PWD <CRLF>
CWD
Changes the current directory (moves from the current
directory to another directory).
Syntax: CWD <SP> <path-name> <CRLF>
FTP File Operations 181