Returning The User File Settings To The Standard Settings; Saving And Loading Scene Files; Saving A Scene File - Sony PDW-700 Operation Manual

Error Cause
message
NO No "Memory
MEMORY Stick" is
STICK inserted.
(flashing)
MEMORY Circuit or
STICK "Memory Stick"
ERROR fault.
(flashing)
FILE The "Memory
ERROR Stick" contains
(flashing) data that cannot
be loaded into
this camcorder.
Returning the user file settings to
the standard settings
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the USER FILE page of the
FILE menu, and press the MENU knob.
For details on menu operations, see "Basic
menu operations" on page 140.
2
Select USER PRESET, and press the
MENU knob.
Action Saving and Loading
Scene Files
Insert or reinsert
the "Memory
Stick".
Recheck, and
You can save various settings for shooting a
consult a Sony
particular scene as a scene file. By loading the
service
scene file, you can quickly recreate setup
representative.
conditions suitable for the scene. You can save up
Data saved to a
to five scene files in the camcorder memory and
"Memory Stick"
up to 100 scene files in a "Memory Stick" .
using a
You can also load data from the "Memory Stick"
camcorder
into the camcorder memory.
whose model is
not the same as
Data that can be saved in a scene file
this camcorder
You can save the following data in a scene file:
cannot be loaded
• Values adjusted using the PAINT menu
into this
• Shutter speed settings made in the standard
camcorder.
mode and ECS mode
• The white balance data included in a scene file
depends on the SCENE WHITE DATA setting
on the REFERENCE page of the FILE menu.

Saving a scene file

To save a scene file to the "Memory Stick", insert
the "Memory Stick" into the "Memory Stick" slot
before starting the following operation.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the SCENE FILE page of the
FILE menu, and press the MENU knob.
For details on menu operation, see "Basic menu
operations" on page 140.
?F04 SCENE FILE
s 1 :STANDARD
s 2 :STANDARD
s 3 :STANDARD
s 4 :STANDARD
s 5 :STANDARD
s STANDARD
SCENE RECALL
SCENE STORE
F.ID: STANDARD
To set a file ID for the data to be saved
Set the file ID before going to step 2.
For details on setting the file ID, see "To set the
file ID" on page 163.

Saving and Loading Scene Files

TOP
: EXEC
: EXEC
165