Warning Messages - Sony PDW-700 Operation Manual

Warning messages

Warning State
indication
— —
Problem
Recording error
Warning State
indication
— —
Problem
Shockproof memory overflow
Warning State
indication
— —
Problem
Input sync error
Warning State
indication
— —
Problem
A disc defect was detected.
Warning State
indication
— —
Problem
Condensation on the optical
pickup
WARNING Warning sound
indicator
VDR operation
Recording stops.
WARNING Warning sound
indicator
b)
VDR operation
Recording continues but may be
substandard.
WARNING Warning sound
indicator
b)
VDR operation
Recording continues but may be
substandard.
WARNING Warning sound
indicator
b)
VDR operation
Recording continues, avoiding the
defect, but may be substandard.
WARNING Warning sound
indicator
b)
VDR operation
Recording/playback continues but
stops when an error occurs on the
drive.
REC/TALLY BATT
—
Action to take
Turn off the power and
consult a Sony service
representative.
REC/TALLY BATT
b) —
b)
Action to take
Protect the unit from shocks
and vibrations.
REC/TALLY BATT
b) —
b)
Action to take
Turn off the power and
contact a Sony service
representative. (This
indication may be given
momentarily when a
GENLOCK signal is
connected or disconnected,
but this does not indicate a
problem.)
REC/TALLY BATT
b) —
b)
Action to take
If defects are detected
repeatedly, exchange the disc.
REC/TALLY BATT
b) —
b)
c)
Action to take
Stop recording/ playback, turn
off the power, then turn it on
again, and wait until the
HUMID indicator disappears.
Operation Warnings 191