Operation Warnings - Sony PDW-700 Operation Manual

Operation Warnings

If a problem occurs when the camcorder is powered or is being operated, a warning is issued by various
visible and audible indicators. These visible and audible indicators are:
• In the status display on the LCD monitor: a warning message ("A" in the "Layout of the table of warning
messages" below) and a warning indication ("B")
• The WARNING indicator on the side panel of the camcorder ("C"), and a warning sound from the
speaker and earphones ("D")
• In the viewfinder: a warning message ("A"), and an indicator above or below the viewfinder screen
("E")
The volume of the warning sound can be adjusted with the ALARM knob. Set the ALARM knob to the
minimum position to suppress the sound.
Layout of the table of warning messages
Warning
indication
B
Problem
• The operation of the WARNING indicator and the indicators in the viewfinder is represented by graphic
symbols as follows.
: Continuous
: 1 flash/s
: 4 flashes/s
• The warning sounds are represented by graphic symbols as follows.
: Continuous beep
: 1 beep/s
: 4 beeps/s
190 Operation Warnings
State WARNING
indicator
C
VDR operation
Warning sound REC/TALY
D E
Action to take
BATT
E