Transport - Vermeiren Luna 2 Instruction Manual

2.11 Transport

L
WARNING:
Risk of injury – See that the bed is attached properly. So you can
avoid injury from the passengers during collision or sudden braking.
L
WARNING:
Risk of injury – Use for attaching the bed and passenger NEVER the
same seatbelt.
L
WARNING:
Risk of injury – Patients may only be transported when recumbent in
the lowest horizontal position.
To avoid damage when transported, the lifting pole should be detached. Unplug the power
cable and check that no cables hang near the floor.
Should the bed be transported over greater distances, use the transport set to do so.
Installing the transport set:
The bed can be mounted by following instructions to the transportset:
Luna 2, Luna Basic 2, Luna UL 2
1. Grasp the panels .
2. Mount the attachment of the transportset  in the
attachment of the panels . And lock with the
locking clamps . Mount the transportset in the
lowest position of the panels.
3. Lock the brakes of the panels .
4. Grasp the feet-end  and hold this with the motor
located to the bottom side.
5. Slide the tube of the feet-end  in the tube of the
transportset . Secure the feet-end  with the
starknobs .
6. Grasp the head-end  and hold this with the motor
located to the upper side.
7. Slide the tube of the head-end  in the tube of the
transportset . Secure the head-end with the
starknobs .
Page 15
2016-06