Lifting Pole; Rastomat (When Available); Transfer In And Out The Bed - Vermeiren Luna 2 Instruction Manual

2.8

Lifting pole

The lifting pole can be mounted on either side of the headrest.

Insert the lifting pole (1) as far as it will go into the relevant socket (2).

Let the groove on the lifting pole (3) slide over the tube in the socket.

Pull the metal loop over the end of the upper frame (4) until the bolts engage one of
the three socket holes (5).

Also pull strap (6) into the metal loop and through the triangle (7); then fix its length.
Secure the strap.

Check that you cannot turn the lifting pole anymore, than the lifting pole is firmly
secured.
2.9

Rastomat (when available)

L
CAUTION:
Risk of injury
is being done.
To adjust the lying surface for the lower leg, grip the foot-end toggle strap in the middle of the
frame. Pull the lying surface for the lower leg to the desired height. The Rastomat will click
into the notch locks at intervals of approx. 20mm. To lower the surface for the lower leg, use
the foot-end toggle strap and pull it to the upper position. The Rastomat will then remove the
lock. You can now completely lower the leg surface slowly until it rests on the bed frame.
Only make adjustments when the grips are at the foot of the bed. Otherwise the bed can tip
over and the adjustment mechanism damaged.

2.10 Transfer in and out the bed

L
CAUTION:
In case you cannot perform the transfer in a safe manner, ask
someone to assist you.
1. Position you as close as possible to the bed.
2. Check the brakes from the bed are in the on position.
3. Remove or fold down the side railings of the bed.
4. Transfer to/from the bed.
1 = Lifting pole
2 =
3 = Groove
4 = Upper frame boom
5 = Socket holes
6 = Strap
7 = Triangle
-
No people or objects allowed close to where adjusting
Page 14
Luna 2, Luna Basic 2, Luna UL 2
Socket lifting pole
2016-06