Strain Relief; Power Cable - Vermeiren Luna 2 Instruction Manual

2.3

Strain relief

L
WARNING:
Do not remove the relief unit.
L
WARNING:
Nothing must be fitted to or hung on the relief unit.
Below the cross bar of the head slatted frame there is a socket for attaching the relief unit.

Insert the relief unit of the power cable  into the suspension .

Pull the desired length of the power cable  in such a way that the power cable 
can be laid under the slatted frame without sagging. Be careful to avoid that the cable
 come under the traction in any adjustment position.

Fasten the power cable by properly tightening the relief unit of the power cable .

Fasten the position of the relief unit by properly tightening the fixing screws .
2.4

Power cable

L
WARNING:
Nothing but the power cable should be suspended here.
L
WARNING:
The power cable can be damaged
carefully positioned without kinks, pulling, shearing or other mechanical
damages and without making contact with the floor.
To ensure that your power cable stays properly functional and in a technically secure
condition even after protracted use, and in the case that you do not operate your bed
electrically, we have at the spar of the slatted frame provided a device  where you might
safely leave the rolled-up cable beneath the nursing bed
1
4
3
-
Page 10
Luna 2, Luna Basic 2, Luna UL 2
1 = Power cable
(power connection)
2 = Power cable
(Transformer
connection)
3 = Holder
Strain relief
2
4 = Strain relief
Power cables
5 = Screw joint
Strain relief
5
The power cable must be
.
2016-06