Mitsubishi MELSEC Q Series User Manual page 22

2 SYSTEM CONFIGURATION
2
Single CPU system
Q00J/Q00/Q01CPU
Multiple CPU system
Single CPU system
Q02/Q02H/Q06H/
Q12H/Q25HCPU
Multiple CPU system
Single CPU system
Q02PH/Q06PHCPU
Multiple CPU system
Single CPU system
Q12PH/Q25PHCPU
Multiple CPU system
Q12PRH/ Redundant CPU
Q25PRHCPU system
Single CPU system
Q00UJ/Q00U/Q01U
CPU
Multiple CPU system
Q02U/Q03UD/
Single CPU system
Q04UDH/
Multiple CPU system
Q06UDHCPU
Q10UDH/Q20UDHC Single CPU system
PU Multiple CPU system
Q13UDH/Q26UDH Single CPU system
CPU Multiple CPU system
Q03UDE/Q04UDEH/
Single CPU system
Q06UDEH/
Q13UDEH/
Multiple CPU system
Q26UDEHCPU
Single CPU system
Q10UDEH/Q20UDE
HCPU
Multiple CPU system
Single CPU system
CPU modules other
than the above
Multiple CPU system
If installed in a MELSECNET/H remote I/O
station
2 - 2
(3) Compatibility with online module change
The A/D conversion module is configured for function version C by default, and
supports online module change.
For the procedure of online module change, refer to Chapter 7.
(4) Q64AD-GH compatible software packages
Relation between the system containing the Q64AD-GH and software package is
shown in the following table.
GX Developer or GX Works2 is necessary when using the Q64AD-GH.
GX Developer
Version 7 or later
Version 8 or later
Version 4 or later
Version 6 or later
Version 8.68W or later
Version 7.10L or later
Version 8.45X or later
Version 8.76E or later
Version 8.48A or later
Version 8.76E or later
Version 8.62Q or later
Version 8.68W or later
Version 8.76E or later
Not supported
Version 6 or later
1: When using the pass data, use the product of Version 1.16S or later.
Software Version
1
GX Configurator-AD
Version 1.14Q or later
Version 1.15R or later
Refer to GX Works2
Operating Manual
Version 2.09K or later
Not supported
Version 1.14Q or later
MELSEC-Q
GX Works2
(Common).
2 - 2