Notice To User - FLIR ix Series User Manual

2

Notice to user

Typographical
This manual uses the following typographical conventions:
conventions
■
■
■
■
User-to-user
Exchange ideas, problems, and infrared solutions with fellow thermographers around
forums
the world in our user-to-user forums. To go to the forums, visit:
http://www.infraredtraining.com/community/boards/
Calibration
(This notice only applies to cameras with measurement capabilities.)
We recommend that you send in the camera for calibration once a year. Contact
your local sales office for instructions on where to send the camera.
Accuracy
(This notice only applies to cameras with measurement capabilities.)
For very accurate results, we recommend that you wait 5 minutes after you have
started the camera before measuring a temperature.
For cameras where the detector is cooled by a mechanical cooler, this time period
excludes the time it takes to cool down the detector.
Disposal of
10742803;a1
electronic waste
As with most electronic products, this equipment must be disposed of in an environ-
mentally friendly way, and in accordance with existing regulations for electronic waste.
Please contact your FLIR Systems representative for more details.
Training
To read about infrared training, visit:
■
■
■
4
Semibold is used for menu names, menu commands and labels, and buttons in
dialog boxes.
Italic is used for important information.
Monospace is used for code samples.
UPPER CASE is used for names on keys and buttons.
http://www.infraredtraining.com
http://www.irtraining.com
http://www.irtraining.eu
Publ. No. T559733_en-US Rev. a571 – ENGLISH (EN) – November 4, 2011