Table of Contents
Advertisement
The appliance is equipped with an
alarm system so that the temperature in
both temperature zones cannot rise or
fall unnoticed, thus possibly damaging
the wine.
Temperature alarm
If the temperature in one of the wine
conditioning zones rises or falls by a
certain amount, the sensor button for
that zone will start flashing in the control
panel and the alarm symbol ; will start
to flash in the display.
An acoustic alarm will also sound.
The audio and visual signals are
triggered, for example:
– when the appliance is turned on and
the temperature in a temperature
zone deviates greatly from the set
temperature
– when too much warm ambient air
enters the cabinet when bottles are
being rearranged or taken out
– when a large number of bottles are
stored for the first time
– in the event of a power failure
As soon as the reason for the alarm has
been resolved, the acoustic alarm will
stop and the alarm symbol ; will go
out. The sensor button for the relevant
zone will light up constantly again.
Temperature and door alarm
Turning off the acoustic alarm
If the acoustic alarm bothers you, it can
be silenced.
^ Tap the sensor button to turn off the
temperature alarm.
The acoustic alarm will stop sounding.
The relevant wine conditioning zone
and the alarm symbol ; will continue
to flash in the display until the reason
for the alarm has been resolved.
Safety device in case of low ambient
temperatures
The appliance is equipped with a safety
thermostat to protect your wine against
a sharp drop in temperature. If the
external temperature should drop
below this level, a heater element turns
on automatically to keep the
temperature inside as constant as
possible. If the ambient temperature
continues to fall, the appliance turns
itself off automatically.
25
Advertisement
Table of Contents
