Recordings Via Application Program - Jetter JX3-THI2-TC User Manual

JX3-THI2-TC
22
23
9.5

Recordings via Application Program

Example: Starting a recording session from the application program
The readings at analog input 2 of a JX3-THI2-TC module are to be recorded in the
application program starting from a certain time. To do so, the oscilloscope function must
be configured and started via module registers.
The overall duration of this recording session is 6 seconds. Thus, the sampling interval
must be set to 20 milliseconds.
•
The JX3-THI2-TC module has got I/O module number 2 on the Jetter system bus.
52
Value range: -50 ... +800
Number of the module register for oscilloscope trigger # 2
Value range: 2, 3
Value for trigger # 2
Value range: -50 ... +800
JetWeb
Jetter AG