Table of Contents
Advertisement
4.6.10 FUNC. SWITCH 1/2
The FS1 and F2 will act as footswitches like those used for amp channel switching. The EFX-LE supports
both standard switch types, latched and momentary. The sub-menu allows the selection of the function
switches type.
1 & 2
Press to move cursor.
3 & 4
When the cursor is at the Line 1 - m
When the cursor is at the Line 2
5/TAP & BANK
When the cursor is at the Line 1 - m
STORE (MODE)
Storing any changes made while in this menu.
EXIT (MUTE/ )
exiting to the Utility menu.
4.6.11 ISO-OUT SOURCE
This sub-menu allows determining which signal is split to the ISO-OUT.
1 & 2
Press to move cursor.
3 & 4
When the cursor is at the Line 1 - n
When the cursor is at the Line 2
5/TAP & BANK
When the cursor is at the Line 1 - n
STORE (MODE)
Storing any changes made while in this menu.
EXIT (MUTE/ )
exiting to the Utility menu.
4.6.12 LP 5/6 RETURN
This sub-menu allows determining whether effect loop 5 and 6 are mono-return or stereo-return.
1 & 2
Press to move cursor.
3 & 4
When the cursor is at the Line 1 - j
When the cursor is at the Line 2
5/TAP & BANK
When the cursor is at the Line 1 - j
STORE (MODE)
Storing any changes made while in this menu.
EXIT (MUTE/ )
exiting to the Utility menu.
EFX - LE Audio Controller Owner's Manual
Line 1
a to m indicate the function switch 1 or 2.
Line 2 - h to p indicate the function switch type.
LATCHED
MOMENTARY
(
or
: Moving a Utility menu.
p
: Switching between
: Moving a Utility menu by 5.
which signal is split to the
Line 2 - h to p indicate
VL.SEND
: VOLUE LOOP SEND
OUT.L
: OUTPUT-LEFT
OUT.R
: OUTPUT-RIGHT
: Moving a Utility menu.
: Scrolling a
p
: Moving a Utility menu by 5.
Line 1
a to j indicate the return of loop 5 or 6.
Line 2 - h to p indicate the
: Moving a Utility menu.
: Switching between
p
: Moving a Utility menu by 5.
).
LATCHED
MOMENTARY
and
ISO-OUT
ISO-OUT SOURCE
value.
-return or
STEREO
MONO
MONO
STEREO
and
.
.
-return
.
.
29
Advertisement
Table of Contents
