4.6.7 TEMPO SYNC TIME
This sub-menu allows determining how long the TEMPO signal outputs.
Line 2 - q to x indicate the TEMPO SYNC TIME value (1 BAR, 2 BARS or CONTINUE).
1 & 2
3 & 4
ENTER/STORE (IA1/SETUP)
EXIT (IA2/MUTE)
4.6.8 XPDL RATE
The XPDL Rate parameter provides a selectable rate at which the EFX MK-V will sample the pedal position
and send out MIDI Control Change messages. The XPDL Rate parameter is adjustable from 1 to 50ms. The
lower the value selected, the faster the transmission. However, the rate may need to be slowed down for
devices where an error may occur from receiving MIDI messages faster than a rate that the device can
process.
Line 2 - t and u indicate the XPDL RATE value (01-50 ms).
1 & 2
3 & 4
ENTER/STORE (IA1/SETUP)
EXIT (IA2/MUTE)
4.6.9 FUNC. SWITCH 1 - 4
The FS1 to FS4 will act as footswitches like those used for amp channel switching. The EFX MK-V
supports both standard switch types, latched and momentary. The sub-menu allows the selection of the
function switches type.
Line 2 - m indicates which function switch (1 to 4) is going to be edited.
Line 2 - o to x indicate the function switch type (LATCHED or MOMENTARY).
1 & 2
3 & 4
ENTER/STORE (IA1/SETUP)
EXIT (IA2/MUTE)
EFX MK-V Audio Controller Owner's Manual
Press to advance to the previous/next Utility menu.
Press to select the desired TEMPO SYNC TIME value.
Press to store any changes made while in this menu.
Press to exit to the UTILITY menu.
Press to advance to the previous/next Utility menu.
Press to select the desired XPDL RATE value.
Press to store any changes made while in this menu.
Press to exit to the UTILITY menu.
Press to advance to the previous/next Utility menu.
Press to switch/toggle the function switch type (LATCHED or MOMENTARY).
Press to store any changes made while in this menu.
Press to exit to the UTILITY menu.
27