Func. Switch; Group Select - Musicom Lab EFX-ME Owner's Manual

4.4.11 FUNC. SWITCH 1/2

The F1 and F2 will act as footswitches like those used for amp channel switching. The EFX-ME supports three types
of switch. Latched, momentary and reverse latched.
The sub-menu allows the selection of the function switches type.
1 & 2
3 & 4
▼
STORE (MODE/BANK )
▲
EXIT (BANK )

4.4.12 GROUP SELECT

This sub-menu allows you define a group of IA Switches where pressing one IA Switch of the group turns that IA
switch on and turns all other IA switches in the group off. Only CC.C1 through CC.C3 switches can be set as a
group. This feature is useful when you control the looper function of a device that can receive MIDI, or when you can
scroll through a bank or preset.
1 & 2
3 & 4
▼
STORE (MODE/BANK )
▲
EXIT (BANK )
Note
• When the corresponding IA switches are grouped, the ON/OFF combination of these switches is not stored into
internal memory and is used only for MIDI transmission through IA3 page.
• The switches specified in groups only transfer MIDI CC On Value, The MIDI CC Off Value is not sent.
EFX - ME Audio Controller Owner's Manual
• Line 1 – a to m indicate the function switch 1 or 2.
• Line 2 - h to p indicate the function switch type.
(LATCHED, MOMENTARY or REV LATCH).
Press to move cursor.
When the cursor is at the Line 1 - m : Moving a UTILITY menu.
When the cursor is at the Line 2 - p : Selecting LATCHED, MOMENTARY or REV LATCH.
Storing any changes made while in this menu.
Exiting to the UTILITY menu.
• Line 2 - h to p indicate the NO ASSIGN
Press to move cursor.
When the cursor is at the Line 1 - l : Moving a UTILITY menu.
When the cursor is at the Line 2 - p : Selecting NO ASSIGN, C1 TO C2 or C1 TO C3.
Storing any changes made while in this menu.
Exiting to the UTILITY menu.
,
C1 TO C2 or C1 TO C3.
22