Inner Door Panel; Door Strike; Door Gasket - GE CDT865SxJ0 Series Technical Service Manual

Inner Door Panel

SS Door Attach Strips
Attachment strips are used to help secure the inner
and outer door panels.
Top
Console
Side Attach Strip
Side Attach
Screws (T15 Torx)
Strip
Side Attachment Strip(s) Removal
1. Remove and separate the inner and outer door
panels.
2. Remove the front control console or top control
panel.
3. Remove the two T15 Torx screws on the side
attach strips.
4. Slide the strip inward to remove.
To Remove the Top Attachment Strip, the Door
side).
The top attach strip may now be removed by sliding
the strip down (the side attachment strips must be

Door Strike

With the UI and Console (pocket handle on front
control models) removed, there is clear access to
the 1/4 in. hex head screw that secures the strike to
the inner door and top attach strip.
Remove the 1/4 in. hex head screw, remove the door
strike. Top attachment strip may now be removed
Door Strike
Attachment Strip
Mounting Screws

Door Gasket

The inner door panel must be replaced to replace
the door gasket (bottom of the door).
– 36 –
1/4" hex head screw
secures Door Strike