Water Valve Removal; Side Fill Jet Assemblies - GE CDT865SxJ0 Series Technical Service Manual

Water Valve Removal

1. Remove power to the dishwasher.
2. Remove the toe kick.
3. Remove two 1/4 in. hex head screws from the
bracket to the leg assembly.
4.
5. Remove the wire harness.
6.
tension on the spring clamps.

Side Fill Jet Assemblies

and secures the jets to the tub. A seal is located on
both the inside and the outside the tub.
The side jet assembly is the same part for both
the left and right sides of the tub. Orientation is
assembly restricts (example, from mineral deposits),
the bottom of the assembly has a weep hole which
will allow water to escape into the tub.
– 62 –