GE CDT865SxJ0 Series Technical Service Manual page 53

Inverter and Motor Diagnostics
Circulation and/or Drain Motor Will Not Operate
The main board illustration below shows connector numbers and pin locations. It also shows the Service LED
location.
• J702 - Motor connector
• J703 - Heater connector
• J711 - DC connector
• J723 is the connector for the Monogram Tub Lighting and the Moisture Sensor (for more information on the
moisture sensor, see the Floor Protect Plan section of this service guide).
Inverter and Motor Diagnostics
Circulation and/or Drain Motor Will Not Operate
– 53 –
(Continued next page)