Main Conduit - GE CDT865SxJ0 Series Technical Service Manual

Main Conduit

The Main Conduit supplies water to the mid spray
arm, bottle wash (on some models) and the upper
spray system (on some models).
Main Conduit Removal
1. Remove both the lower and upper racks.
2. Remove the lower spray arm.
3. Remove the mid spray arm docking port by
releasing the tabs on each side of the docking
cone. The docking cone will remain attached to
the main conduit.
4. Push on the tab and pull up on the conduit to
release from the diverter.
Main
Conduit
5. Models PDF820S, PDT825S and CDT835S,
conduit to complete the removal (some models).
NOTE: Using rinse aid or water on the main conduit
seal in the diverter will aid main conduit installation.
– 77 –