Bottom Door Seal; Inner Door Panel - GE GLDT690T Technical Service Manual

https://appliancetechmanuals.com

Inner Door Panel

To remove the inner door panel:
1. Disconnect power.
2. Remove the control panel. (See
3. Remove the detergent/ rinse module. (See
Detergent/ Rinse Module
4. Remove the 4 Phillips-head screws (2 on each
side) that attach the inner door panel to the
bottom door bracket .
Note: When installing the inner door, place a pair
of pliers into the bottom door bracket to prevent it
from closing.
.)
Control Panel
.)

Bottom Door Seal

The bottom door seal prevents water leakage by
sealing between the bottom of the door and the
tub. It is not replaced as a separate part on this
dishwasher. It is replaced as part of the inner door
panel. (See
Inner Door Panel
– 20 –
.)