Filtration - GE CDT865SxJ0 Series Technical Service Manual

Filtration

Good
twist lock design. The Owner's Manual advises the
consumer to remove and clean every 60 days or
more frequently depending on use. Using brushes or
and prevent air locks in the wash and drain pumps.
They should also be inspected and cleaned as
needed. Allowing the air to escape improves water
Vent Caps are twist lock; counter-clockwise to
remove, clockwise to secure.
The Fine Filter is located on the sump assembly
and should be cleaned each year or as needed for
for improved cleanability.
the turbidity sensor and into the circulation pump.
Fine Filter
mixes with the water that has passed through the
the circulation pump.
turbidity sensor, entering the circulation pump.
– 66 –