Advertisement
ADDITIONAL STEPS FOR LEFT SIDE INSTALLATION
Note: Replace Step 5 of the installation by the 4 following steps. When all steps are
completed, continue installation at Step 6.
Step 5.1: Secure the support (K) with the existing screws (L) (2X) located on the top of the
combustion chamber.
Step 5.2: Unscrew the bolts (M) (12X), washers (N) (12X) and nuts (O) (12X) located on the
periphery of the combustion chamber cover. Carefully remove the combustion
chamber cover (P) and the seal (Q). Turn the cover 180° and reinstall it with the seal.
Secure it in place with the bolts, nuts and washers removed earlier.
16
Advertisement
