Playing The Picture On A Tv - Sony Handycam DCR-TRV480E Operation Manual

Playing the picture on
a TV
A/V jack
Signal flow
When your TV is connected to a VCR
Connect your camcorder to the LINE IN input
on the VCR using the A/V connecting cable. Set
the input selector on the VCR to LINE.
When your TV is monaural (When your
TV has only one audio input jack)
Connect the yellow plug of the A/V connecting
cable to the video input jack and connect the
white (left channel) or the red (right channel)
plug to the audio input jack of your TV or VCR.
When you want to play the sound in monaural
mode, use a connecting cable (optional) for that
purpose.
Connect your camcorder to a TV using the
supplied A/V connecting cable as shown in
the following illustration.
Connect the supplied AC Adaptor to the wall
socket for the power supply (p. 14).
Refer also to the instruction manuals supplied
with the devices to be connected.
To copy to another tape, see page 88.
A/V connecting cable (supplied)
If your TV/VCR has a 21-pin connector
(EUROCONNECTOR)
To play back movies, connect your camcorder
to the TV/VCR, using the 21-pin adaptor
(optional).
Yellow
White
Red
VCRs or TVs
TV/VCR
57
Playback