Data Code - Sony Handycam DCR-TRV480E Operation Manual

PB MODE
USB-CAMERA
USB-PLY/EDT

DATA CODE

80
Using the Menu
GAUTO
Select to automatically detect the system (Hi8
or Digital8
back the tape. During switching of systems, the screen turns blue, and
the following displays appear on the screen. A hissing noise also
sometimes can be heard.
t
standard 8 mm
to Digital8
/
Select to play back a tape that was recorded on other devices in the Hi8
automatically detect the recording system.
Note
b
• The setting returns to [AUTO] when you disconnect the power source from your camcorder
or slide the power switch.
You can connect a USB cable (supplied) to your camcorder, and view the picture
displayed on the screen of your camcorder on your computer (USB Streaming).
For details, refer to "First Step Guide" in the supplied CD-ROM.
GOFF
Select to deactivate the USB Streaming function.
USB STREAM Select to activate the USB Streaming function.
You can connect a USB cable (supplied) to your camcorder, and view the picture
on the tape or "Memory Stick" in your camcorder on your computer. For details,
refer to "First Step Guide" in the supplied CD-ROM.
GSTD-USB Select to view the picture on the "Memory Stick."
PictBridge
Select to connect the PictBridge compliant printer (p. 102).
USB STREAM Select to view the picture on the tape.
GOFF
Select not to display date, time and the camera settings data during
playback.
DATE/TIME
Select to display the date and time during playback (p. 55).
CAMERA DATA Select to display the camera settings data during playback (p. 55).
) that was used to recorded on the tape, and play
/ : During switching from Digital8
.
t
/ : During switching from Hi8
.
/standard 8 mm system when your camcorder does not
/standard 8 mm
to Hi8 /
/standard 8 mm