Sony Handycam DCR-TRV480E Operation Manual page 113

z Tip
• If you use a DVD-RW/+RW which has other
data stored on it, the message [This is a
recorded disc. Delete and overwrite?] appears
on the LCD screen of your camcorder. When
you touch [EXEC], the existing data is erased
and new data is written.
9
Touch [NO] to finish creating a DVD.
The disc tray comes out automatically.
60min 0:00:00:00
BURN DVD
COMPLETED
C r e a t e a n o t h e r
c o p y ?
D i s c t r a y o p e n s .
YES NO
To create another DVD with the same
content, touch [YES]. The disc tray comes
out. Place a new writable DVD in the disc
drive. Then, repeat steps 8 and 9.
To cancel the operation
Touch [CANCEL].
b Notes
• You cannot cancel the operation after [Finalizing
DVD.] is displayed on the LCD screen of your
camcorder.
• Do not disconnect the i.LINK cable or set the
POWER switch to another mode on your camcorder
until the picture is completely copied to the
computer.
• The DVD is created even if you disconnect the
i.LINK cable (optional) or turn off the power of your
camcorder while [WRITING] or [CONVERTING]
is displayed.
• When any of the following occurs, copying of the
picture is canceled. A DVD containing the data up to
the point the operation was canceled is created.
Refer to the help files of "Click to DVD Automatic
Mode Launcher" for details.
– When there is a blank portion of 10 seconds or
longer on the tape.
– When the data of the tape contains a date before
the recording date of the later images.
– When normal and wide size pictures are recorded
on the same tape.
• You cannot operate your camcorder in the following
situations:
– While playing back a tape
– While recording images onto a "Memory Stick"
– When "Click to DVD" is started up from the
computer
– When [A/V t DV OUT] in the menu settings of
your camcorder is set to on.
• You may not be able to create a DVD from an 8mm
tape if it contains pictures recorded in a format other
than Digital8 format.
Using with your computer
113