Viewing Recordings With Added Effects - Digital Effect - Sony Handycam DCR-TRV480E Operation Manual

Viewing recordings with added
effects – Digital effect
You can apply [STILL], [FLASH], [LUMI.
KEY], and [TRAIL] effects when viewing
recorded pictures. For details on each effect,
see page 42.
1
Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
2
Touch while the picture you
want to add the effect to is displayed.
3
Touch [MENU].
4
Select (PICT. APPLI.), then [D.
EFFECT] by touching
.
5
Select an effect, then adjust the effect
by touching
(increase).
6
Touch twice, then
appears.
POWER switch
/ and
(decrease)/
.
To cancel Digital effect
Follow steps 2 to 4, then select [OFF] in step 5.
b Notes
• You cannot add effects to externally input pictures.
Also, you cannot output pictures edited with digital
effects via the DV Interface.
• The Digital effect function does not work with tapes
recorded on other devices in the Hi8
mm system.
z Tip
• You cannot record the pictures edited using special
effects on the tape in your camcorder, but you can
copy them to a "Memory Stick" (p. 90) or another
tape (p. 88).
/standard 8
49
Playback