Sony Handycam DCR-TRV480E Operation Manual page 112

– USA
http://www.ita.sel.sony.com/support/
dvimag/
– Asia Pacific Regional
http://www.css.ap.sony.com/
– Korea
http://scs.sony.co.kr/
– Taiwan
http://vaio-online.sony.com/tw/vaio/
– China
http://www.sonystyle.com.cn/vaio/
– Thailand
http://www.sony.co.th/vaio/index.html
– Latin America
http://vaio-online.sony.com/
Using the Direct Access to "Click to
DVD" function for the first time
The Direct Access to "Click to DVD" function
enables you to copy pictures recorded on a tape
to a DVD easily if your camcorder is connected
to a computer. Before operating the Direct
Access to "Click to DVD" function, follow the
steps below to start "Click to DVD Automatic
Mode Launcher."
1
Turn on the computer.
2
Click the start menu, then select [All
Programs].
3
Select [Click to DVD] from the programs
displayed, then click [Click to DVD
Automatic Mode Launcher].
[Click to DVD Automatic Mode Launcher]
starts up.
Tips
z
• After you start up [Click to DVD Automatic Mode
Launcher] once, from then on it starts up
automatically when you turn on your computer.
• [Click to DVD Automatic Mode Launcher] is set up
for each Windows XP user.
1
Turn on the computer.
Quit all applications running with an
i.LINK.
2
Prepare the power source for your
camcorder, then slide the POWER
switch repeatedly to select the PLAY/
EDIT mode.
112
Using with your computer
Use the supplied AC Adaptor as the power
source since it takes a few hours to create a
DVD.
3
Insert a recorded cassette into your
camcorder.
4
Connect your camcorder to a
computer via an i.LINK cable
(optional).
Note
b
• When you connect your camcorder to a
computer, make sure you insert the connector in
the correct direction. If you insert the connector
forcibly, it may be damaged, and causes a
malfunction of your camcorder. For details, see
"First Step Guide."
5
Touch .
6
Touch [BURN DVD].
"Click to DVD" starts up and the on-screen
instructions appear on your computer.
7
Place a writable DVD in the disc drive
of the computer.
8
Touch [EXEC].
60min 0:00:00:00
BURN DVD
START
CREATE DVD?
EXEC CANCEL
The status of the operation on your
computer is displayed on the LCD screen of
your camcorder.
CAPTURING: The picture recorded on
the tape is being copied to the computer.
CONVERTING: The picture is being
converted to the MPEG2 format.
WRITING: The picture is being written
onto the DVD.