Sony Handycam DCR-TRV480E Operation Manual page 41

[OVERLAP] (fade in only)
[WIPE] (fade in only)
[DOT FADER] (fade in only)
1
Slide the POWER switch to select the
CAMERA-TAPE mode.
2
Touch in the standby mode (to
fade in) or during recording (to fade
out).
3
Touch [FADER].
If the item is not displayed on the screen,
touch / . If you cannot find it, touch
[MENU], and select it from the
APPLI.) menu.
60min STBY 0:00:00
FADER: OFF
BLACK
OFF
FADER
1/2
WHITE MOSAIC
FADER FADER
4
Touch the desired effect, then touch
.
When you touch [OVERLAP], [WIPE] and
[DOT FADER], the image on the tape in
your camcorder is stored as a still image.
(While storing the image, the screen turns to
blue.)
60min
5
Press REC START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
To cancel the operation
Follow steps 2 and 3, then touch [OFF] in step 4.
b Notes
• The OVERLAP, WIPE and DOT FADER functions
do not work with tapes recorded on other devices in
the Hi8
• The title does not fade in or fade out. Erase it before
operating the FADER function if it is not needed.
• You cannot use the FADER function together with:
– Super NightShot plus function
– Color Slow Shutter function
– Digital effect
– [INTERVAL REC] (Interval recording)
– [FRAME REC] (Frame recording)
– Self-timer
Fading in from still image on the
(PICT.
"Memory Stick" – Memory overlap
You can fade in from the still image on the
"Memory Stick" to the movie currently being
recorded on the tape.
Still image
1
Check that you have a "Memory Stick"
with the still image to be superimposed
and a tape in your camcorder.
2
Slide the POWER switch to select the
CAMERA-TAPE mode.
3
Touch
4
Touch
STBY 0:00:00
BLACK
FADER
P-MENU
/standard 8 mm system.
.
[
MENU].
Recording
Movie
,continued
41