Playing The Picture On A Tv - Sony HANDYCAM DCR-DVD703 Operating Manual

Playing the picture on a TV

Connect your camcorder to the wall outlet using the supplied AC adaptor for this operation
(p.17). Refer also to the instruction manuals supplied with the devices to be connected.
A/V jack
: Signal flow
A/V connecting cable (supplied)

Connect to the input jack of the other device.
A/V connecting cable with S VIDEO

(optional)
When connecting to another device via the
S VIDEO jack, by using an A/V connecting
cable with an S VIDEO cable (optional),
higher quality pictures can be produced than
with an A/V cable connection. Connect the
white and red plug (left/right audio) and the
S VIDEO plug (S VIDEO channel) of the
A/V connecting cable with an S VIDEO cable
(optional). The yellow plug connection is not
necessary.
When your TV is connected to a VCR
Connect your camcorder to the LINE
IN input on the VCR. Set the input
selector on the VCR to LINE.
42
(Yellow) (White)
S VIDEO VIDEO
To set the aspect ratio according to
the connected TV (16:9/4:3)
(DCR-DVD203/DVD403/DVD703/
DVD803)
Change the setting according to the screen
size of the TV you will view pictures on.

Slide the POWER switch down to light up
the

Touch
[16:9] or [4:3]
• When you connect your camcorder to a TV
compatible with the ID-1/ID-2 system, or via an
S VIDEO jack, and play back the disc, set [TV
TYPE] to [16:9]. The TV switched to full mode
automatically. Refer also to the manual supplied
with your TV.
• When you set [TV TYPE] to [4:3], the image
quality may deteriorate. Also, when the
recorded picture's aspect ratio switches between
16:9 and 4:3, the image may jitter.
(Red)
AUDIO
VCRs or TVs
(Play/Edit) lamp.
[SETUP]
 
STANDARD SET [TV TYPE]

.

