Connecting An Analog Vcr To The; Digital Convert Function; Computer Via Your Camcorder Digital Convert Function - Sony Handycam DCR-TRV480E Operation Manual

Connecting an analog
VCR to the computer
via your camcorder

– Digital convert function

A/V jack
A/V connecting cable (supplied)
: Signal flow
When connecting to a VCR via the
supplied A/V connecting cable
Connect the A/V connecting cable to your
camcorder. An A/V jack works as an input as
well as an output. It switches automatically
depending on the operational status.
• Software that can record the video signal must
be installed on your computer beforehand.
Before operation
Set [DISPLAY] in the menu settings to [LCD
PANEL] (the default setting) (p. 82).
114
Using with your computer
Using the A/V connecting cable (supplied) and
an i.LINK cable (optional), you can convert an
analog signal output from an analog device such
as a VCR to a digital signal and transfer it to a
digital device, such as a computer, via your
camcorder.
i.LINK cable (optional)
DV Interface
Yellow
White
Red
1
Turn on the analog video unit.
2
Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
Use the supplied AC Adaptor as the power
source.
3
On the LCD panel, touch
[MENU] t [
t [A/V t DV OUT] t [ON] t
i.Link jack
Computer
VCRs or TVs
(STANDARD SET)]
t
.