Playing The Picture On A Tv - Sony Handycam DCR-DVD408 Operating Manual

Playing the picture on a TV
Connect your camcorder to the input jack of TV or VCR using A/V connecting cable
rn
or
A/V connecting cable with S VIDEO
[2].
Connect your camcorder to the wall outlet using the
supplied AC Adaptor for this operation (p.22). Refer also to the instruction manuals supplied
with the devices to be connected.
VCRs or TVs
VIDEO
e
(Red)
(White)
AUDIO
Device with
S VIDEO jack
IN
S
VIDEO
01····
VIDEO
o
• When you connect your camcorder to a TV
compatible with the ID-IIID-2 system and play
back the disc, set [TV TYPE] to [16:9]. The TV
switches to full mode automatically. Refer also to
the instruction manuals supplied with your TV.
• When you set [TV TYPE) to [4:31, the image
quality may deteriorate. Also, when the recorded
To set the aspect ratio according to the
connected TV (16:9/4:3)
Change the setting according to the screen
aspect ratio of the TV you will view pictures
on.
G) Turn the POWER switch to turn on your
camcorder.
®
Touch
~
(HOME) -
;i';(SETTINGS) - [OUTPUT
SETTINGS] - [TV TYPE] - [16:9] or
[4:3] -lOKI.
" Notes
(Yellow)
(Red)
i
Device without
!
S VIDEO jack
[
[IN
I
I
I
~-6·.-.i1I1Ilt-(-W-hi~ (~
!
AUDIO
When your TV is connected to a VCR
Connect your camcorder to the LINE IN
input on the VCR. Set the input selector on
the VCR to LINE (VIDEO 1, VIDEO 2, etc.),
if the VCR has an input selector.
A/V OUT jack
: Signal flow
rn
AN connecting cable (supplied)
Connect to the input jack of the other device.
[2]
AN connecting cable with S VIDEO
(optional)
When connecting to another device via the S
VIDEO jack, by using an AN connecting cable
with an S VIDEO cable (optional), higher
quality pictures can be produced than with an
A/V connecting cable. Connect the white and
red plug (left/right audio) and the S VIDEO
plug (S VIDEO channel) ofthe AN connecting
cable with an S VIDEO cable (optional). The
yellow plug connection is not necessary. S
VIDEO connection only will not output audio.
44