Playing The Picture On A Tv - Sony DCR-HC19E Service Manual

Playing the picture on a TV

Connect your camcorder to the wall outlet using the supplied AC Adaptor for this operation
(p. 10). Refer also to the instruction manuals supplied with the devices to be connected.
A/V jack
: Signal flow
 A/V connecting cable (supplied)
Connect to the input jack of the other
device.
 A/V connecting cable with S VIDEO
(optional)
When connecting to another device via
the S VIDEO jack, by using the A/V
connecting cable with an S VIDEO cable
(optional), pictures can be reproduced
more faithfully than with the supplied A/V
cable connection.
Connect the white and red plugs
(left/right audio) and S VIDEO plug (S
VIDEO channel) of an A/V connecting
cable (optional). In this case, the yellow
(standard video) plug connection is not
necessary. S VIDEO connection only will
not output audio.
When your TV is connected to a VCR
Connect your camcorder to the LINE IN
input on the VCR. Set the input selector on
the VCR to LINE.
34
1
(Yellow) (White) (Red)
2
For DCR-HC42:
To set the aspect ratio according to
the connected TV (16:9/4:3)
Change the setting according to the screen
size of the TV you will view pictures on.
 Slide the POWER switch down to turn on
the PLAY/EDIT lamp.
 Touch 
(STANDARD SET)  [TV TYPE] 
[16:9] or [4:3] 
When you connect your camcorder to a TV
•
compatible with the ID-1/ID-2 system, or via
an S VIDEO jack, and play back the tape, set
[TV TYPE] to [16:9]. The TV automatically
switches the aspect ratio according to the
playback picture.
Refer also to the manual supplied with your TV.
When you set [TV TYPE] to [4:3], or when the
•
picture's aspect ratio switches between 16:9 and
4:3, the image may jitter.
IN
VCRs or TVs
 [MENU] 
.