Sony Handycam DCR-TRV480E Operation Manual page 120

Symptom
END SEARCH does not work
correctly.
The built-in light does not function.
Playback
If you are playing back the pictures stored on a "Memory Stick," refer also to the "Memory Stick"
section. (p. 121)
Symptom
Cannot play back.
Horizontal lines appear on the
picture. The displayed pictures are
not clear or do not appear.
No sound or only a low sound is
heard.
The sound breaks off.
Cannot perform the Date search with
the recording date displayed on the
screen.
The picture is not played back
correctly.
"---" is displayed on the screen.
END SEARCH does not work.
END SEARCH does not work
correctly.
120
Troubleshooting
Cause and/or Corrective Actions
• There is a blank section in the beginning or middle of the tape. This is
not a malfunction.
cPress LIGHT repeatedly to select
cIf the problem persists, contact your Sony dealer or local authorized
Sony service facility.
Cause and/or Corrective Actions
cIf the tape has reached the end, rewind the tape. (p. 47)
cClean the head using the cleaning cassette (optional). (p. 141)
cSet [MULTI-SOUND] to [STEREO] in the
menu. (p. 77)
cTurn up the volume. (p. 47)
cOn the
(STANDARD SET) menu, adjust [AUDIO MIX] from the
[ST2] (sub sound) side until the sound is heard appropriately. (p. 78)
cMake sure the red and white plugs of the A/V connecting cable are
connected. (p. 57)
cClean the head using the cleaning cassette (optional). (p. 141)
• There is a blank section in the beginning or middle of the tape. This is
not a malfunction.
cSet [PB MODE] to [
for the tape recorded on other devices in Hi8
system. (p. 80)
cSet [PB MODE] to [AUTO] in the
the tape recorded in Digital8
• The tape you are playing was recorded without setting the date and time.
• A blank section on the tape is being played.
• The data code on a tape with a scratch or noise cannot be read.
• The cassette was ejected after recording.
• The cassette is new and has nothing recorded.
• There is a blank section in the beginning or middle of the tape. This is
not a malfunction.
.
(STANDARD SET)
/ ] in the (STANDARD SET) menu
/standard 8 mm
(STANDARD SET) menu for
system. (p. 80)