Advertisement
Instrument Markings
Listed below are definitions for the markings that may be found on the product.
IP 2 0
ccr.keysight@keysight.com
ICES/NMB-001
Safety
Complies with the essential requirements of the European Low Voltage Directive.
EMC
Complies with the essential requirements of the European EMC Directive as well as current editions of the
following standards (dates editions are cited in the Declaration of Conformity):
•
IEC/EN 61326-1
•
CISPR Pub 11 Group 1, Class A
•
AS/NZS CISPR 11
•
ICES/NMB-001
This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme a la norme NMB-001 du Canada.
To find a current Declaration of Conformity for a specific Keysight product, go to:
http://regulations.about.keysight.com/DoC/search.htm
Keysight N9030-90061
The instruction documentation symbol. The product is marked with this symbol when it is
necessary for the user to refer to the instructions in the documentation.
The AC symbol indicates the required nature of the line module input power.
This symbol indicates separate collection for electrical and electronic equipment,
mandated under EU law as of August 13, 2005. All electric and electronic equipment are
required to be separated from normal waste for disposal (Reference WEEE Directive,
2002/96/EC).
This symbol indicates that the power line switch is ON.
This symbol indicates that the power line switch is in the OFF position.
The instrument has been designed to meet the requirements of IP 2 0 for egress and
operational environment.
The RCM mark is a registered trademark of the Australian Communications and Media
Authority.
Indicates the time period during which no hazardous or toxic substance elements are
expected to leak or deteriorate during normal use. Forty years is the expected useful life
of the product.
The CE mark is a registered trademark of the European Community.
The Keysight email address s required by EU directives applicable to our product.
This is a symbol of an Industrial Scientific and Medical Group 1 Class A product (CISPR
11, Clause 5).
This is a marking to indicate product compliance with the Canadian Interference-Causing
Equipment Standard (ICES-001). Cet appareil ISM est conforme à la norme NMB du
Canada.
This symbol on all primary and secondary packaging indicates compliance to China
standard GB 18455-2001.
South Korean Certification (KC) mark; includes the marking's identifier code which
follows this format: MSIP-REM-YYY-ZZZZZZZZZZZZZZ.
9
Advertisement
