Assembly; U-Handle Installation - Shindaiwa C302 Operator's Manual

C302
1 Operator's Manual
1 Warranty Statement
1 Shield With Cut Off Knife
1 Shield Without Cut Off Knife
1 Safety Glasses
1 U-handle Mounting Clamp (Upper)
4 Bolts
2 Cable Clips
1 Lower Fixing Plate
1 Large Nut (Blade Mounting)
1 Shoulder Harness W/hip Pad
1 Cotter Pin

ASSEMBLY

U-Handle Installation

Parts Required:
1. Position u-handle as shown and
install upper u-handle clamp (A)
and secure with 4 u-handle
bolts (B).
2. Route throttle linkage and
ignition lead assembly along
shaft and clip as shown.
X7502350400
© 5/2018 ECHO Inc.
U-Handle, upper u-handle clamp, 4 u-handle bolts
ASSEMBLY
A
C B
17