Packing list
The following parts are packed separately in the packing box.
When you have unpacked the box, please check the parts that it contains.
Contact your dealer if anything is missing or broken.
1.
Engine and shaft tube
2.
U-handle
3.
Shield (for metal blade)
4.
Shield (for nylon line cutting head)
5.
Shoulder harness
6.
3 cutter blade
Assembly
Read the operator's manual carefully to ensure that you assemble the product correctly.
Using a product that has been incorrectly assembled could lead to an accident or serious injury.
U-handle version
U-handle assembly
Before you start
7.
Blade cover
8.
Operator's manual
9.
Locking tool
10. Socket wrench
11. L-wrench
WARNING
1.
Install handle assembling bracket (upper) (A) in handle as-
sembling bracket (lower) (D) and fix handle by tightening
handle assembling bolt (8 mm) (B) lightly.
2.
Adjust inclination of handle to adequate position (easy to op-
erate) and tighten firmly handle assembling bolt.
C: Washer
9
Before you start