Shield Installation - Shindaiwa C302 Operator's Manual

C302
Never reuse a cotter pin - install a new cotter pin each time a blade
is installed or replaced.
5. Remove locking tool (H).

Shield Installation

(Nylon line head operation)
Parts Required:
Shield with cutoff knife is for use with the Nylon Line Head only.
Install shield without cutoff knife when using plastic or metal
blades, or serious injury may result.
1. Remove blade and blade mounting hardware if installed, and retain for
future use with blade conversions.
2. Loosen bolt and nut (J, K)
holding shield without cutoff
knife to shield base.
3. Press tab (L) and slide shield
off shield base.
X7502350400
© 5/2018 ECHO Inc.
Shield with cutoff knife
ASSEMBLY
J
J
K
L
K
L
21