Stopping Engine - Shindaiwa C302 Operator's Manual

C302
2. Purge Bulb
Pump purge bulb (C) until fuel is
visible in the "Clear" fuel return
line.
Note: Lightly place knee on
drive shaft to stabilize unit
during starting. Do not
apply excessive
downward force or
damage to unit can occur.
3. Recoil Starter
Lay the unit on a flat area and
keep movable attachment parts
clear of all obstacles. Firmly grip
throttle handle and throttle
trigger lockout with left hand.
Rapidly pull recoil starter
handle/rope (D) until engine
fires.
Note: If engine does not start
after 5 pulls, use Cold
Start Procedure.

Stopping Engine

1. Throttle
Release throttle trigger and
allow engine to return to idle
before shutting off engine.
2. Stop Switch
Move stop switch button (A)
forward to STOP position.
X7502350400
© 5/2018 ECHO Inc.
OPERATION
C
B
E
E
A
D
D
33