Equipment - Shindaiwa C302 Operator's Manual

SAFETY
Avoid Hot Surfaces
• Keep Exhaust Area Clear Of Flammable Debris.
Avoid Contact During And Immediately After
Operation.

Equipment

Use only ECHO INC. attachments. Serious injury may result
from the use of a non-approved attachment combination. ECHO
INC. will not be responsible for the failure of cutting devices,
attachments or accessories which have not been tested and
approved by ECHO INC. Read and comply with all safety
instructions.
Check unit for loose or missing nuts, bolts, and screws.
◆
Tighten or replace as needed.
Inspect shield for damage and ensure that shield is
◆
properly installed, and that that the cut-off knife is
securely in place. Replace if either is damaged or missing.
Check that the cutting attachment is firmly attached and in
◆
safe operating condition.
Assure that throttle trigger, throttle trigger lockout, and
◆
stop switch all work properly.
Check that handle and harness (if included) are
◆
adjusted for safe, comfortable operation. See
Assembly Section for proper adjustment.
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
ALWAYS stop engine, disconnect spark plug, and make
◆
sure all moving parts have come to a complete stop before
assembling unit, removing obstructions, clearing debris, or
servicing unit.
Do not connect spark plug lead to spark plug unitl unit is
◆
ready for use.
12
C302
X7502350400
© 5/2018 ECHO Inc.