Figure 15: Parallel Installation Diagram
To add or to remove a UPS to an existing system, go to section 5.3.3
4.3
Batteries
Each battery block consists of 24 batteries of 12V in series. The nominal DC voltage of a battery block is
therefore 288Vdc.
4.3.1
In-built batteries
Some models of PowerValue 31/11 T have with interbal batteries. These batteries are already installed
and connected when the units are delivered. To replace, reduce or increase the amount of batteries,
connect the batteries as indicated in Figure 16. Connect the terminals to their matching color terminals.
1x24 batteries
2x24 batteries
Figure 16: Internal batteries connections
4NWP100559R0001_OPM_ABB_PVA31-11-T_10-20kVA_EN_140626
Page 19/37 ABB
Modifications reserved