Axell Shell (Command Line Interface) - Axell Wireless MBF-40 Series Product Description And User's Manual

AXELL MBF-40 AMERICAS REPEATER
PRODUCT DESCRIPTION AND USER'S MANUAL
To reboot the Control Module:
1. Click the Config tab.
2. Click on the Reboot icon.
3. Approve the Reboot sequence.

6.6 Axell Shell (Command Line Interface)

To access the Axell Shell:
1. Click on the Config button.
2. Select the Axell Shell option.
The Axell Shell button invokes the CLI pane. It is used to run some of the commands
that are currently not provided by the Web GUI (user privileges and administration)
and/or for advanced troubleshooting and configurations procedures.
All configuration and management procedures can be implemented using this interface.
Please refer to the Attribute Reference section (by clicking the Cofing button on the top
right and selecting Attribute Reference – see 6.7) for detailed syntax and available
commands. You may also consider viewing the MBF-40 Commands and Attributes
document.
© Axell Wireless Ltd Doc. No. 00071UM Rev. 3.2 69