Integration Into The Aem; What Next - Axell Wireless MBF-40 Series Product Description And User's Manual

AXELL MBF-40 AMERICAS REPEATER
PRODUCT DESCRIPTION AND USER'S MANUAL

5.3 Integration into the AEM

NOTE: Integration into the AEM is only performed from the AEM side – no action is required from the
MBF-40 side.
The AEM automatically connects to the repeater, downloads all the repeater parameters
and statuses into a database. When all parameters have been downloaded, the AEM
configures the repeater with the IP address where alarms and reports should be sent to,
and optionally with a secondary IP address where the repeater can connect to in case
connection to primary IP fails.
When heartbeat reports and alarms are sent from the repeater to the AEM also the
latest information about the status and RF-configuration is included. This means that the
AEM operator always has information about the current status in the AEM database (and
does not need to call the repeater to find this out).
NOTE: Once the repeater is integrated to the AEM, all changes to the repeater should preferably be
done from the Axell Element Manager in order to ensure that the database always contains correct
information.

5.4 What Next?

The MBF-40 unit is now ready for operation. You may monitor the unit's general status
via the OMU II Main window and if the node is faulty (red LED), access the dedicated
configuration screen in Basic or Advanced view for more information.
NOTE: Consult the OMU II User Manual for additional information on RF and Optical adjustments.
© Axell Wireless Ltd Doc. No. 00071UM Rev. 3.2 61