AXELL MBF -40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER'S MANUAL
3.3.3 Fan Hood and Bracket Assembly
WARNING!!
•
•
•
The fan hood and bracket assembly procedure is as follows:
•
Assemble rear fan hood and mounting brackets
Mount the repeater on the wall
•
Assemble the front fan hood
•
Connect power to both fan hoods
•
To assemble the fan hood
1. Place the repeater on a flat surface, repeater door panel facing down, interfaces
towards you.
2. Loosely assemble the mounting brackets:
• Align innermost bracket holes to repeater mounting holes.
• Loosely insert bolts and washers.
26
This Fan Hood is to be assembled only on the MBF-40 units for which it is
designed and with which it is supplied.
Do NOT assemble this fan hood on any repeater models for which it is not
specifically designed.
Be sure to CAREFULLY follow all instructions – beginning with Step-1.
Repeater front door
panel facing down
Figure 14: Place Brackets on top the MBF
Doc. No. 00071UM Rev. 3.2
Align brackets and loosely
insert x4 bolts and washers
© Axell Wireless Ltd