3.2 Standard Repeater Installation
NOTE: Refer to this section if your repeater installation does not consist of either a fan assembly or a
Master / Slave (five service) system.
3.2.1 Unpacking
Upon receiving the MBF-40 Repeater perform the following:
1. Examine the shipping container for damage before unpacking the unit.
2. Perform a visual inspection to reveal any physical damage to the equipment.
3. Verify that all of the equipment (listed below) is included. Otherwise contact Axell
Wireless Ltd. The MBF-40 Repeater is shipped with the following equipment:
3.2.2 Parts List
Package Contents
MBF-40
Single/Dual/Tri/Quad-
band Repeater
CD containing User's
Manual and USB driver
Mounting Brackets
Cable protection KPL
Additional (supplied)
installation components:
Optional equipment
© Axell Wireless Ltd
PRODUCT DESCRIPTION AND USER'S MANUAL
Qty.
Description
4x
M8x12 bolts for securing the Repeater to the
brackets
1x
Insex tool for bolts
1x
Fiber Conduit inlet hose fitter (may be pre-
assembled)
1 x
Key
AC Cable [30 ft.] – Long cable for AC power
Alarm Cable [30 ft.] – Long cable for External Alarms
Input
Doc. No. 00071UM Rev. 3.2
AXELL MBF-40 AMERICAS REPEATER
17