3.5 Grounding
Connect the grounding protection as follows:
Ensure that good grounding protection measures are taken to create a reliable
•
repeater site.
Make sure to use adequately dimensioned grounding cables. The minimum
•
recommended conductive area for a grounding cable is 16mm
Make sure the grounding product used is suitable for the kind and size of cable being
•
used.
Connect the repeater box bolt to the same ground.
•
NOTE: For Dual Unit assemblies (five frequency band support), ground both units.
Figure 3-22: Grounding the MBF-40
© Axell Wireless Ltd
AXELL MBF-40 AMERICAS REPEATER
PRODUCT DESCRIPTION AND USER'S MANUAL
Doc. No. 00071UM Rev. 3.2
2
35