Remote Communication Setup; Tcp/Ip And Ethernet - Axell Wireless MBF-40 Series Product Description And User's Manual

AXELL MBF-40 AMERICAS REPEATER
PRODUCT DESCRIPTION AND USER'S MANUAL

6.2 Remote Communication Setup

This section describes the Ethernet and SNMP setup. The SNMP setup option
also available in this dialog is described in section 6.3. SNMP .
Select an option (ETH:TCP or ETH:SNMP) and configure. Then select the next relevant
option.
NOTE: The configuration of each option is saved and active. It is not relevant which option is
currently selected (ETH:TCP or ETH:SNMP).

6.2.1 TCP/IP and Ethernet

1. Click on the Config button.
2. From Device:Method select ETH:TCP (Ethernet:TCP/IP).
3. Click Apply.
Figure 6-6: Remote ETH Configuration
© Axell Wireless Ltd Doc. No. 00071UM Rev. 3.2 65