Features And Capabilities - Axell Wireless MBF-40 Series Product Description And User's Manual

AXELL MBF -40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER'S MANUAL

1.1 Features and Capabilities

• High-power indoor/outdoor unit, single-band, dual-band, tri-band, quad-band
models, supporting the following bands (model dependent):
• LTE 700MHz (Upper and Lower band)
• SMR 700/800/900
• Cellular 850MHz
• PCS 1900MHz
• AWS 1700MHz (MIMO model available)
• 2600
Up to four frequencies in a single enclosure
•
Five-band single fiber-optic solution – implemented using two units MBF-40 Master
•
and MBF-40 Slave models
Single enclosure MIMO support
•
Output power at the antenna (composite): 37dBm, 39dBm, 43dBm (model
•
dependent)
Very low noise factor - minimizes interference to BTS and increases high speed data
•
throughput
Single or Dual Fiber feed models available
•
Remote commissioning and monitoring:
•
• Via OMU II intuitive Web GUI
• Via AEM – no local setup required
• SNMP v1/v2c support
Plug-and-Play: Automatic detection and Optical Gain Setting via the OMU
•
• Automatic Level Control (ALC) - provides constant gain in both uplink and downlink
paths according to the defined maximum output level
Backup battery for 'last gasp' indication (sending fault error before power failure)
•
Optional - two internal power supplies provided for some models ensure robust unit
•
operation
Power source: 115VAC or -48V power (model dependent)
•
2 Doc. No. 00071UM Rev. 3.2 © Axell Wireless Ltd