3.9.6 Backup Battery
On the Power Supply unit a rechargeable battery pack in mounted. This part also
•
includes charging and supervision electronics.
The backup battery will provide the Control Module with enough capacity to send an
•
alarm in case of input power failure.
The battery can be switched on and off. The switch is placed adjacent to the main
•
power switch on the power supply.
At delivery the back-up battery is connected.
•
The battery is replaced by lifting the battery pack out of the crate and disconnecting
•
the cable.
© Axell Wireless Ltd
PRODUCT DESCRIPTION AND USER'S MANUAL
Connector
Figure 3-36: Backup Battery
Doc. No. 00071UM Rev. 3.2
AXELL MBF-40 AMERICAS REPEATER
45