Change Password; Reboot - Axell Wireless MBF-40 Series Product Description And User's Manual

AXELL MBF -40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER'S MANUAL
There are five different access levels:
Access Level
Read-Only
Read-Write
Web
User Administrator
System Administrator
Note: New users added to the system have read-only access.
Users may be promoted
USERPROMOTE command. See Common Commands and Attributes document for
details on promoting users.
Note: Users omcuname, sysadmin and useradmin cannot be promoted to Web Access due to
security reasons.

6.4.3 Change Password

To prevent unauthorized access, it is highly recommended to change the default
password of the user.
NOTE: Note that you can only change the password for the User Name with which the session was
accessed.
To change the Password
1. In the Main menu, click the Config button.
2. Click the Change Password button.
3. For the current User Name (e.g. axell):
• Enter the New password.
• Repeat the entry.
4. Click Apply.
NOTE: The password is not encrypted during transmission. Use this screen only if the connection to
the repeater is safe. Use the CLI commands using an encrypted connection, if possible (i.e. SSH).

6.5 Reboot

CAUTION!! Use this function in Emergency Cases ONLY
68
Default User Levels
axell, omcuname, useradmin, sysadmin
axell, omcuname, useradmin, sysadmin
axell
omcuname, useradmin, sysadmin
omcuname, sysadmin
to read-write and/or
Doc. No. 00071UM Rev. 3.2
web access using
© Axell Wireless Ltd
ACT
the