Recording A Still Image From Other Equipment - Sony DCR-IP5E/IP7E Operating Instructions Manual

Recording an image from a tape
as a still image
Recording a still image from
other equipment
Before operation
Set DISPLAY in
(p. 124). (The default setting is LCD.)
(1) Set the POWER switch to VCR.
(2) When using the A/V connecting cable, set
VIDEOINPUT to the appropriate position
depending on the player (p. 103).
(3) Play back the recorded tape.
The image from the other equipment is
displayed on the screen.
(4) Follow steps 3 and 4 on page 156.
Using the A/V connecting cable
: Signal flow/
Connect the yellow or black plug of the A/V
connecting cable to the video or S video jack on
the VCR.
158
to LCD in the menu settings
S VIDEO or VIDEO/
OUT
S VIDEO
VIDEO
(1)
(2)
(3)
(4)
A/V