Sony DCR-IP5E/IP7E Operating Instructions Manual page 105

Recording a programme
When you have finished dubbing the
tape
z
Select , then press the centre z on the control
button on your camcorder and stop the playback
of the VCR.
If your VCR is a monaural type
Connect the yellow plug of the A/V connecting
cable to the video output jack and the white or
red plug to the audio output jack on the VCR.
When the white plug is connected, the left
channel audio is output, and when the red plug
is connected, the right channel audio is output.
If your VCR has an S video jack
Connect using the S video plug to faithfully
obtain original pictures. With this connection,
you do not need to connect the yellow (video)
plug of the A/V connecting cable. Connect the S
video plug to the S video jack of the VCR. This
connection produces higher quality MICROMV
format pictures.
Note (DCR-IP7E only)
When you press MEMORY PLAY on the Remote
Commander in step 5, an image recorded on the
"Memory Stick" is displayed. If you select REC
START, then press the centre z on the control
button, the image will be recorded on the tape.
To stop memory playback, press MEMORY
PLAY on the Remote Commander again.
When using the i.LINK cable
z
Simply connect the supplied i.LINK cable to the
i.LINK (MICROMV) jack of your camcorder and
to the i.LINK (MICROMV) jack of the MICROMV
product. With digital-to-digital connection, video
and audio signals are transmitted in digital form
for high-quality editing. (You cannot connect the
camcorder to a DV product.)
105